Cement Testing Equipments

The equipment consists of : A vibrating table size 380 mm long and 260 mm wide, resting upon elastic support at a height of about 305 mm above the floor, complete with Start/Stop switch, cord and plug. A holder is fixed to the base in to which a swivel arm is telescoped with funnel andguide swivelarmisalso detachable fromthevibrating table. The divisions of scale on the rod record the slump of the concrete in millimeters. Supplied complete with a sheet metal container with lifting handles which can easily be fixed to the vibrating table. A slump cone open at both ends with lifting handles and a tamping rodofsize 16 mm dia and 600 mm long rounded at both ends.

The L Shape box is used for determining the passing ability rate offreshly mixed self compacting concrete. The distance between 12 mm diameter bars can be set between 411 mm or 591 mm. L Shape box is designed for ease of cleaning the vertical and horizontal hoppers. The l shape box apparatus is supplied complete with:

This Motorized Laboratory Concrete Mixer is a semi-automatic mixer designed to provide quick and precise preparation of concrete mixtures of varying strength. Made of durable metal, this blue mixer is powered by electricity and is suitable for industrial and laboratory use. With its semi-automatic operation, this mixer is capable of efficiently preparing concrete mixtures of varying strength quickly and accurately.

The flowtableconsists ofa 30cmdiapolish steel plate with 3engravedannular circles7,11 and 19cm dia. The table top is arranged for a free fall of 12.5mm by a cam action. Suppliedcomplete with one brassconical mould, 65mmi.d. atbase and 40mm i.d. at top,heightofthemould90mm.

Designed to find out specific gravities of semi liquids like mud and other liquids having densities in the range 0.8 to 2.7. It has a stainless steel bam calibrated specific gravities from 0.8 to 2.7. A stainless steel cup with lid and over flow vent is fitted on one side of the beam. A counter weights with curs or slides over the graduated scale. The beam has a knife-edge at center

A base with a Vertical shaft and Two horizontal arms. The lower arms is adjustable for height. 1 no. Initial needle 1/12-inch dia lb. Wt. 1 no. Final needle 1/24 inch dia. lb. Wt. 1 no. Glass base plate. Complete as above.

It is supplied complete with base. All parts are marked with the identification number for correct assembly. Each mould is individually verified in the dimensional tolerances, hardness, squareness, flatness & roughness. Size: 40.1 X 40 X 160 mm

The instrument employs a friction free, accurate, double lever system, the load being applied by means of sliding weight on the top lever. The capacity of the units is 900kgs.Afterfixing the briquette in the jaws, the machine is switched on. The sliding weight slides over the calibrated lever thus applying tension to the specimen. A micro switch fitted instantly stop the machine on failure of the briquette and on failure the tensile load is accurately 0.5kg.Bymeansof a marker provided on the sliding weight to its zero position. Suitable for operation on 230 V, 50 cycles, Single Phase, A.C. supply. Supplied complete with one brass briquette mould and one base plate

The autoclave is suitable for conducting accelerated soundness tests on cement or the autoclave expansion test requiring constant steam pressure with the correspondent constant pressure. It consists of a stainless steel cylinder with a welded heat insulated metal housing attractively finished. The attached control unit encloses a sensitive pressure regulator and pressure gauge. Power switches and pilot lights for controlling the electric heating units. Inside chamber dimensions 10.5 m diameter x 40.5cm height suitable for operation on 230V,50 Hz Single Phase A. C. supply. Supplied complete with test bar holder, special rack to hold specimens above water level in the autoclave and in a vertical position to expose them in the same manner. A Digital PID Controller is fit ed for controlling the desired temperature.

Technical Specifications: Total Weight of Machine Approx. 650 Kg Microprocessor based electronic display - 10 touch Screen heaving features:-Menu Driven Sample Detail Auto Calculation facility Peak Load Peak Stress Real-time graph in computer screen Test Record storing with Unique 1000 nos. Start, stop, pause, reset, load hold facility Data collecting USB Automatically transfers and saves test records and graphs in Desktop Provision to configure Test Modes for Flexure, Prism Testing and Split Tensile Strength, Aggregate Crushing. Each mode having independent calibration points Load Least Count 0.1 kN

Consists of a steel table top 76.2cm ( 30 inch. Dia) Finely machined. The integral cast ribs are designed for support and strength. The stand is fabricated out of cast iron and is of study construction. Holes for mounting in foundations are drilled in the base plate. The ground and hardened steel cam is designed to fit and drop the table by 12.5mm.Electrically operated to raise and drop the table top, approx. 15 times in 15 seconds, Suitable for operation on 230 Volts,50 cycles, A.C. supply. Supplied with one conical mould with two handles,12cm height, having 17cm. Inside Dia. at the Top and 25cm inner dia. at the base. Complete with a tamping rod 16mm dia x 600mm long one end rounded.